3D Wall Panel Paintable Dekota 60x120 cm / Tree Pattern

3D PAINTED DECOTA WALL PANEL 60*120 cm

• 2-pack 1.44 m²
• 7-pack 5 m²

General Features:

• Our panels cover the damaged surfaces of your walls and make them aesthetic without the need for a master , without breaking them , without creating rubble and waste .
• It is 4-5 mm thick and can be bonded to ytong or brick with silicone or ceramic adhesive .
• It can be easily cut with a utility knife .
• It eliminates the need for rough plaster, fine plaster, finishing and sanding processes.
• It provides an aesthetic look without using wallpaper, oil paint, tiles or ceramics.
• Produced in white, the panels can be painted with wall paints using a roller or brush .
• It makes construction or renovation processes quick and economical.

Features of 3D Paintable Dekota Wall Panel:

1. With its 2 kg/m² weight, it reduces the burden on your walls and your budget.
2. It is flame retardant and non-conductive .
3. Blocks up to 20 decibels of noise — providing comfort and privacy.
4. It provides savings in heating costs with its thermal insulation feature.
5. 3D embossed patterns can be created specifically for specific locations.
6. With its low cost and easy application , it provides significant savings in renewal costs for businesses.
7. It is tenant friendly — it can be dismantled and used elsewhere if necessary.

Application Instructions:

• Apply silicone or ceramic adhesive to the back of the panel , spot-by-dot, and often enough .
• After applying the adhesive, press the panel against the wall and continue pressing for 15–30 seconds .
• Cover the entire surface you want to cover by carefully placing the panels side by side.

Wet surface application (bathroom, kitchen, balcony):

• Leave a 2–3 mm joint gap between panels.
• After the bonding is completed, fill the joints and end areas with a paintable and water-resistant joint filler .